Filter
Top Products
Chapter 1 Introduction 11
Access lamp*
Lights when a memory card is inserted into the card slot. This lamp flashes while the machine is
reading or writing data from/to the memory card. When the machine finishes reading the card, the lamp
extinguishes.
Card slot*
Insert a memory card or CF card adaptor containing a memory card into these slots when photo
printing. The machine is equipped with two kinds of card slots.
Memory card eject button*
Press this button to remove the CF card adaptor, Microdrive memory card, or CompactFlash from the
card slot.
USB connector (for digital camera)*
Used to connect a “PictBridge”- or Canon “Bubble Jet Direct”-corresponding digital camera or digital
video camcorder to the machine when printing images directly from the camera.
Inner cover
Open this cover when setting the paper thickness lever, replacing the ink tanks, or clearing a paper jam.
CAUTION
• Printing with the inner cover open may result in injury.
Print head holder
Used to install a print head.
Scan unit
Lift this unit until it locks into place when the inner cover needs to be opened.
Paper thickness lever
Switches the distance between the print head and print media according to the media type.
Adjust the lever to the position appropriate for the print media loaded.
Power connector
Used to connect the power cord of the machine.
USB connector (for computer)
Used to connect a computer to the machine when printing from or scanning to the computer.
*MP370