Filter
Top Products
Print Media You Can Use
10
2-10
Important
z To avoid paper jams, make sure that the trailing edge is aligned square with the
length guide, and make sure that the edges at (d) are straight and not slanted.
z Wait for all of the paper or other print media in the cassette to be used up before
loading more paper.
z Never mix different types of paper or other print media in the same stack.
z When printing transparencies, always load one sheet of plain paper the same size
as the transparencies on the bottom of the stack.
7
Move the width guide until it rests lightly against the side of the stack.
z To ensure smooth paper feed from the cassette, make sure that the width guide is
snug and not too tight against the side of the stack. If the width guide is too tight, or
if there is a gap between the paper and the guide, this may cause paper to feed
incorrectly.
8
Install the cassette cover.
Align the four pegs on bottom of the cassette cover with the holes in the
cassette below and set the cover on the cassette.
d
00_J80xUG_Eng.book Page 10 Friday, April 12, 2002 12:28 AM