Filter
Top Products
v
v
z To ensure normal operation of the printer and avoid possible damage,
never install the printer near large office equipment or any other type of
electrical device that emits a strong magnetic field.
Moving the Printer
z To avoid dropping and damaging the printer or the paper feed unit or
causing personal injury when moving it, always grip the printer or the paper
feed unit by the lift handles provided on the left and right side of the printer
or the paper feed unit.
z To avoid breaking a paper cassette and personal injury, always remove the
cassettes before lifting and moving the printer or a paper feed unit.
z The Model N2000 weighs 16 kg (35 lb.) To avoid back strain or other
personal injuries, at least two people, lifting together at the front and back
of the printer, are required to move the printer.
Power Supply
z To avoid damaging the power plug, which could cause a short circuit and
cause a fire or electrical shock, never pull on the power cord to unplug the
cord from the power supply. Always grip the plug to remove it from the
power supply.
z To avoid a fire or electrical shock, do not use an extension cord.
z To prevent fire or electrical shock, never use a power supply source other
than the one rated for the printer in the country where you purchased the
printer.
AC 100-127 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Cleaning the Printer
z To avoid minor burns or minor injury from moving parts, before cleaning the
printer always press the Power button to switch off the printer then unplug
the power cord from the power supply and allow the electrical contacts
inside the printer to cool.
Printhead and Ink Tanks
z Store the ink tanks out of the reach of small children. If a child accidentally
ingests ink from an ink tank, contact a physician immediately.
z To avoid staining clothing or your work area with spilled ink, never shake or
drop the printhead or an ink tank.
00_J80xUG_Eng.book Page v Friday, April 12, 2002 12:28 AM