Filter
Top Products
User Command Specifications
9．Details of command GET SAT
1
GET SAT
GET SAT
GET□SA
T
?△SA
T
g
:SAT=<Color saturation value settin
g
: Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
With some input signals, it may not be possible to make this inquiry.
-2 The color saturation can be set by the SAT command.
> GET SAT or ? SAT
< g:SAT=1
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
X600
××
SX60
○○
○○–×
SX6
×××○○○ ×
○○○–
SX50
×××
Remarks
D-RGB A-RGB1
SX50
A-RGB2 Comp Video S-Video D-Video SCART
Model Power
Input Mode
None Remote Local
Color saturation value setting inquir
y
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Mode
Control Setting Reference
SX6
This inquires about the current color saturation value setting.
Number
SX60 X600
Commands
Function
Format
Description
Response
01.00** 01.01** 01.01** 01.01*
○○○○
Command
s
supported
Example
PAGE 92