Filter
Top Products
User Command Specifications 9. Details of command AUTOPC
1
AUTOPC
AUTOPC
AUTOPC
None
-1
A "busy" response is given while the zoom or focus lens is being driven.
Furthermore, it may not be possible to execute the command with some input signals.
-2
-3
・Total number of dots
・Tracking
・Horizontal/vertical position
s
・Number of horizontal/vertical display dot
s
-4
For details, refer to the GET commands below.
Total number of dots GET DOTS
Tracking GET TRACK
Horizontal position GET HPOS
Vertical position GET VPOS
Number of horizontal display dots GET HPIX
Number of vertical display dot
s
GET VPIX
> AUTOPC
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
01.01**
X600
○
01.01**
Command
s
supported
SX60SX50 SX6
01.00** 01.01**
Mode Control Setting
Auto PC
GET Setting
Reference
Response
Description
This command is identical to pressing the “AUTOPC” button on the remote control or front pane
(Refer to the ZCONTDRV command and FCONTDRV command.)
'i:OK' is returned when control has been executed successfully.
It can be executed when the projector is in both the remote mode and power-on status at the
same time.
Commands
Function
Parameter
○
For all other responses, refer to "Error List."
Example
Execution of this command may modify the following setting values.
Auto PC execution
To confirm modified setting values, use the GET command of the respective parameter.
○○
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video
Mode
Remote Local
Remarks
SX50
× ○○ ○×
SCART NoneD-Video
–××××–
×××××××○
Format
SX60
X600
SX6
× ○○
PAGE 20