Filter
Top Products
User Command Specifications ９．Details of command GET SHARP
1
GET SHARP
GET SHARP
GET□SHAR
P
?△ SHAR
P
g
;SHARP=<Sharpness settin
g
: Number
>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The sharpness can be set by the SHARP command.
> GET SHARP or ? SHARP
< g:SHARP=3
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
SX60 X600
○○○––○○
SX50 SX6
Commands
Function
Format
Description
Response
This inquires about the current sharpness value setting.
Command
s
supported
Sharpness value setting inquir
y
01.01** 01.01** 01.01** 01.01**
○○○○
Model Power
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○ ×
SX6
○○○○○○○○ ×○○
X600
SX60
Setting Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Example
Number
Mode Control
PAGE 86