Filter
Top Products
User Command Specifications
9．Details of command GET DGAMMA
1
GET DGAMMA
GET DGAMMA
GET□DGAMM
A
?△DGAMM
A
g
:DGAMMA=<Settin
g
: ID>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The dynamic gamma setting value can be selected by the DGAMMA command.
> GET DGAMMA or ? DGAMMA
< g:DGAMMA=1
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○○○–
Setting
ID
Meaning
SX60 X600
0 Off
1On
SX50
Dynamic gamma value setting inquir
y
Mode Control Setting Reference
SX6
Commands
Function
Format
Description
Response
This inquires about the current dynamic gamma value setting.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Command
s
supported
01.00** 01.01** 01.01** 01.01**
○○○○
Model Power
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○ – ○○×
SX6
○○○ ×○○○○ ○○○
SX60
Example
X600
PAGE 88