Filter
Top Products
User Command Specifications
9．Details of command RANGE SAT
1
RANGE SAT
RANGE SAT
RANGE□SA
T
r:SAT=N, <Minimum setting value>, <Maximum setting value>
-1
A "busy" response is given while the zoom or focus lens is being driven.
With some input signals, it may not be possible to make this inquiry.
-2
> RANGE SAT
< r:SAT=N, -20, 20
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Command
s
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The color saturation can be set by the SAT command.
○○○○
01.00** 01.01** 01.01** 01.01**
Commands
Function
Format
Example
Description
Response
SX6
This inquires about the range within which the color saturation can be set.
Number
SX60 X600
Color saturation setting range reques
t
Mode Control Setting Reference
Model Power
Input Mode
None Remote Local
Remarks
D-RGB A-RGB1
SX50
A-RGB2 Comp Video S-Video D-Video SCART
SX50
×××○○○–– ×
SX6
×××○○○ × ○○
○○
SX60
××
X600
PAGE 147