Filter
Top Products
User Command Specifications ９．Details of command GET RGBGAIN
1
GET RGBGAIN
GET RGBGAIN
GET□RGBGAIN
?△RGBGAIN
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
The RGB gain can be set using the
RGBGAIN command
.
> GET RGBGAIN or ? RGBGAIN
< g:RGBGAIN=-10, 0, 19
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
X600
×○
SX60
○○
－－－－
SX6
○○○○○○ ○
－－－－
SX50
－－－
S-Video D-Video SCART NoneA-RGB1 A-RGB2 Comp Video
RGB gain adjustment value inquiry
Model Power supply
Input Mode
Remote Local
Remarks
D-RGB
This command is used to inquire about the current RGB gain adjustment values.
Setting
Number
SX60 X600
ControlMode
Reference
Commands
Function
Format
Description
Response
×
○○○
g:RGBGAIN=<R adjustment value：Number>▽<G adjustment value：Number>▽<B
adjustment value：Number>
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
su
pp
orted
Example
０１．００** ０１．０１** ０１．０１** ０１．０１**
SX50 SX6
PAGE 94