Filter
Top Products
User Command Specifications ９．Details of command GET 6AXADJ
1
GET 6AXADJ
GET 6AXADJ
GET□6AXADJ
?△6AXADJ
g:6AXADJ=<Setting：ＩＤ>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
ON or OFF for the 6-axis adjustment can be set using the
6AXADJ command
.
>
GET 6AXADJ or ? 6AXADJ
<
g:6AXADJ=ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
ON
Meaning
This sets the 6-axis adjustment to ON.
０１．０１** ０１．０１** ０１．０１**
×○○○
6-axis adjustment ON/OFF inquiry
SX50
Reference
Setting
OFF
Setting
Commands
Function
Format
Description
Response
ControlMode
Model Power supply
Input
NoneS-Video D-Video SCART
Mode
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video Remote Local
SX50
－－－－－－－－－－－
SX6
○○○○○○○○○○×
SX60
X600
This sets the 6-axis adjustment to OFF.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
su
pp
orted
Example
SX6
This command is used to inquire whether the 6-axis adjustment is ON or OFF.
ＩＤ
SX60 X600
０１．００**
PAGE 98