Filter
Top Products
User Command Specifications 9. Details of command GET PJON
1
GET PJON
GET PJON
GET□PJON
?△PJON
g
:PJON=<Settin
g
：ＩＤ>
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The setting for the screen displayed at startup can be set by the PJON command.
> GET PJON or ? PJON
< g:PJON=SKIP
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
User screen
ID
For all other responses, refer to "Error List."
Commands
Function
Format
Screen displayed at startup setting inquir
y
Mode Control Setting
Description
Response
This inquires about the current setting for the screen to be displayed at startup.
Canon log
o
SKIP No display
LOGO
Setting Meaning
CANON
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○○○○
Model Power
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○○○○––○○×
SX6
○○○○○○○○○○×
X600
Command
s
supported
Example
SX60
PAGE 107