Canon X600 Projector User Manual


 
User Command Specifications 9.Details of command GET LEDILLUMINATE
1
GET LEDILLUMINATE
GET LEDILLUMINATE
GET□LEDILLUMINATE
?△LEDILLUMINATE
g:LEDILLUMINATE=<Setting:ID>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
Refer to the
ZCONTDRV command and FCONTDRV command.
(2)
LED lighting control can be set using the
LEDILLUMINATE command
.
>
GET LEDILLUMINATE or ? LEDILLUMINATE
<
g:LEDILLUMINATE=OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
ーーー
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
X600
SX60
○○○×○○○○
SX6
○○○
-ーーーーーー-
SX50
ーーー
S-Video D-Video SCART None
Mode
Remote Local
Remarks
Model Power supply
Input
D-RGB A-RGB1 A-RGB2 Comp Video
×○○○
01.01** 01.01** 01.01**
Meaning
X600
OFF
SX50 SX6 SX60
SettingControlMode
Response
Setting
ON
Commands
Function
Format
Emotional LED and signal sensing LED lighting setting inquiry
ID
Reference
Commands
su
pp
orted
This sets the LED display to ON.
This sets the LED display to OFF.
This command is used to inquire about the current emotional LED and signal sensing LED lighting control
settings.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Example
Description
01.00**
PAGE 117