Filter
Top Products
User Command Specifications
9．Details of command GET WBRGB
1
GET WBRGB
GET WBRGB
GET□WBRGB
?△WBRGB
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The screen color correction (adjustment) can be set by the WBRGB command.
> GET WBRGB or ? WBRGB
< g:WBRGB=10, 0, 19
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
×○○○○○○○
SX6
○○○
– ○○×○○○–
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
01.01** 01.01**
○○○○
Number
SX60 X600
g:WBRGB=<R adjustment value: Number>▽<G adjustment value: Number>▽<B
adjustment value: Number>
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
SX6SX50
This inquires about the current screen color correction (adjustment).
Screen color correction (adjustment) inquir
y
Mode Control Setting Reference
Command
s
supported
Commands
Function
Format
Description
Response
01.00**
Example
01.01**
PAGE 91