Filter
Top Products
User Command Specifications 9 .Details of command RANGE IMAGEFLIP
1
RANGE IMAGEFLIP
RANGE IMAGEFLIP
RANGE□IMAGEFLIP
r:IMAGEFLIP=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE IMAGEFLIP
< r:IMAGEFLIP=I, NONE, CEILING, REAR, REAR_SEILING
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○
X600
SX60
×○○○○ ○○
SX6
○○○
○○×○○○––
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.00** 01.01** 01.01** 01.01**
Control
Setting
SX50 SX6 SX60 X600
Mode
Function
Format
Flip display setting option reques
t
This inquires about the parameter options which enable the flip display to be set.
ID
The flip display can be set using the IMAGEFLIP command.
Command
s
supported
Reference
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Example
Description
Response
Commands
PAGE 160