Filter
Top Products
User Command Specifications
9．Details of command GET WB
1
GET WB
GET WB
GET□WB
?△WB
g
:WB=<Screen color correction value: ID>
Meaning
Normal
Blackboard
ADJUST Adjust
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The screen color correction can be set by the WB command.
> GET WB or ? WB
< g:WB=GREENBOARD
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
×○
SX60
○○
○○–×
SX6
○○○○○○ ○
SCART None
SX50
○○○○○○–
Mode
Remote Local
Remarks
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Screen color correction inquir
y
Mode Control Setting Reference
SX6
This inquires about the current screen color correction.
ID
SX60 X600
Response
NORMAL
GREENBOAR
D
SX50
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
Function
Format
Description
Response
01.00** 01.01** 01.01** 01.01**
○○○○
Command
s
supported
Example
PAGE 90