Filter
Top Products
User Command Specifications
9．Details of command RANGE PJON
1
RANGE PJON
RANGE PJON
RANGE□PJON
r:PJON=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE PJON
< r:PJON=I, CANON, SKIP, LOGO
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Command
s
supported
Example
SX60
X600
○○○×○○○○
SX6
○○○
– ○○×○○○–
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.00** 01.01** 01.01** 01.01**
SX50 SX6 SX60 X600
Description
Response
This inquires about the parameter options which enable the display screen setting at startup to be set.
For all other responses, refer to "Error List."
ID
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The setting for the screen displayed at startup can be set by the PJON command.
Commands
Function
Format
Display screen at startup setting option reques
t
Mode Control Setting Reference
PAGE 162