Canon X600 Projector User Manual


 
User Command Specifications 9. Details of command DPON
1
DPON
DPON
DPON=<Direct power-on setting parameter:ID>
Direct power-on setting parameters
For details, refer to the
RANGE command
.
For all other res
p
onses, refer to
"Error List."
This command is used to set direct power-on function to ON or OFF.
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
Refer to the
ZCONTDRV command and FCONTDRV command.
(2)
(3)
("e:1004 POWER_MANAGEMENT_OFF" is returned.)
(5)
For details, refer to the
GET command
.
Setting
> DPON=ON Direct power-on is set to ON.
< i:OK
Reference
> GET DPON or ?DPON The current direct power-on setting is obtained.
<
g:DPON=ON
Acquisition of parameters which can be set
> RANGE DPON
< r:DPON=I,ON,OFF "ON" or "OFF" can be set for direct power-on.
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
OFF ON PM
---
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
su
pp
orted
Meaning
This sets direct power-on to ON.
This sets direct power-on to OFF.
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
Parameter
The current direct power-on setting can be obtained using the GET command.
ON
Description
Example
Response
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
Direct power-on cannot be set to ON when "OFF" has been selected as the power management
setting.
Commands
Function
Parameter
Format
Control
This command functions in the same way as when "System settings" - "Direct power-on" are
selected on the menu.
Setting
Reference
Direct power-on setting
Mode
ID
OFF
"i:OK" is returned if the parameter was set properly.
01.00** 01.01** 01.01** 01.01**
SX50
○○
SX6 SX60 X600
Model Power supply
Input Mode
Remote Local
×○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
-----------
SX6
○○○ ○×○○○○○
SX60
X600
PAGE 63