Filter
Top Products
Basic Printing
6
Loading Envelopes
Use either DL or US Comm. #10 size envelopes.
(3) Select Envelope
EnvelopeEnvelope
Envelope in Media Type
Media TypeMedia Type
Media Type, and then select Comm. Env. #10
Comm. Env. #10Comm. Env. #10
Comm. Env. #10 or DL Env
DL EnvDL Env
DL Env. in
Page Size
Page SizePage Size
Page Size.
For the printer driver setting, refer to "Printing with Windows
Printing with WindowsPrinting with Windows
Printing with Windows" on page 10,
"Printing with Macintosh
Printing with MacintoshPrinting with Macintosh
Printing with Macintosh" on page 12.
Note
• Do not stack more than 10 sheets in the Paper Output Slot Cover.
• Do not touch the printed surfaces until the ink dries. For specific
drying times, refer to the instructions packaged with your media.
Important • Do not use envelopes with embossed or treated surfaces, a double
flap, pressure seals or sticker flaps.
• Select either DL Env.
DL Env.DL Env.
DL Env. or Comm. Env. #10
Comm. Env. #10Comm. Env. #10
Comm. Env. #10 according to the envelope
size you are using.
F
o
ld
t
h
e enve
l
ope
fl
ap s
h
ut.
(1) Align the envelope
against the right side of
the Auto Sheet Feeder.
The flap of the envelope
will appear with its flap
facing up on the left side.
A maximum of 5
envelopes can be loaded
at once.
Printing direction
(2) Slide the Paper Guide against the left side of
the envelope.
iP90_QSG_US.book Page 6 Thursday, December 7, 2006 11:03 AM