Filter
Top Products
Advanced Printing
28
About “Image optimize”
If you use a Canon PictBridge-compliant camera, you can select “VIVID”, “NR”, or
“VIVID+NR”. (Note that these options cannot be selected for some models.)
About “Date print”
By default, “Off” is selected for this printer.
If you select an image which has had the shooting date embedded in it using a
camera with the print mode, set that function to off. If you set this function to on,
dates will appear twice on the printed image.
Note
• When “VIVID” is selected, green and blue portions of photos are
printed vividly.
• When “NR” (Noise Reduction) is selected, noise in blue portions,
such as the sky, and dark portions is removed.
• When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are
performed.
Note
• Never disconnect the USB cable during printing.
• When disconnecting the USB cable between the device and printer,
follow the instructions given in the instruction manual of the device.
• Controls of the digital camera cannot be used for the following:
- Print quality setting
- Printer maintenance
iP90_QSG_US.book Page 28 Thursday, December 7, 2006 11:03 AM