Filter
Top Products
Printing Maintenance
51
4 Check the Print Head condition.
(1) Click Print Check Pattern
Print Check PatternPrint Check Pattern
Print Check Pattern in the dialog appeared after cleaning is complete.
A nozzle check pattern will be printed.
Do not perform any operation until printing of the nozzle check pattern is
completed.
(2) Observe the printed nozzle check pattern to check the Print Head condition.
See "Examining the Nozzle Check Pattern
Examining the Nozzle Check PatternExamining the Nozzle Check Pattern
Examining the Nozzle Check Pattern" on page 45.
(3) If the problem persists after you performed Print Head normal cleaning three
times, execute Print Head deep cleaning.
See "Print Head Deep Cleaning
Print Head Deep CleaningPrint Head Deep Cleaning
Print Head Deep Cleaning" on page 52.
iP90_QSG_US.book Page 51 Thursday, December 7, 2006 11:03 AM