Filter
Top Products
Printing Maintenance
54
4 Check the Print Head condition.
(1) Print a nozzle check pattern to check the Print Head condition.
See "Printing the Nozzle Check Pattern
Printing the Nozzle Check PatternPrinting the Nozzle Check Pattern
Printing the Nozzle Check Pattern" on page 42.
(2) If the problem persists, perform step 3 again.
(3) If the problem persists, the printer may have run out of ink.
See "Replacing an Ink Tank
Replacing an Ink TankReplacing an Ink Tank
Replacing an Ink Tank" on page 61.
(4) If the problem persists, the Print Head may be damaged. Contact the Canon
Customer Care Center.
1 Ensure that the printer is turned on.
2 Open the BJ Printer Utility dialog box.
(1) Double-click the hard disk icon where the printer driver was installed, the
Applications
ApplicationsApplications
Applications folder, and then the Utilities
UtilitiesUtilities
Utilities folder.
(2) Double-click the Printer Setup Utility
Printer Setup UtilityPrinter Setup Utility
Printer Setup Utility icon.
If you are using the OS other than Mac OS X v.10.3, double-click the Print Center
Print CenterPrint Center
Print Center
icon.
(3) Select iP90
iP90iP90
iP90 from the Name
NameName
Name list and click Utility
UtilityUtility
Utility or Configure
ConfigureConfigure
Configure.
(4) Select iP90
iP90iP90
iP90 from the Product
ProductProduct
Product list and click Maintenance
MaintenanceMaintenance
Maintenance.
Note
The BJ Printer Utility cannot be used with Bluetooth communication.
iP90_QSG_US.book Page 54 Thursday, December 7, 2006 11:03 AM