Filter
Top Products
Troubleshooting
80
Low Ink Warning
Accompanied by Ink
Tank Icon With a '?'
Failure to reset ink
counter when
installing new ink
tank
The ink tank level accompanied by the ink tank icon with the “?” indicates ink
tank is not synchronized with its ink counter.
Always be sure to reset the ink counter in your printer driver when you replace an
ink tank. See "Resetting the Ink Counter
Resetting the Ink CounterResetting the Ink Counter
Resetting the Ink Counter" on page 64.
Problem Possible Cause Try This
Note
NoteNote
Note
A “?” is displayed next to the Ink counter between the time one
ink tank is removed and the ink counter is reset when the next
one is installed. When you want to suspend the ink replacing
message and “?”, change a setup in accordance with the
following process.
1. Ensure that the printer is turned on.
2. Open the Printer Properties
Printer PropertiesPrinter Properties
Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from
Opening the Printer Properties Dialog Box Directly from Opening the Printer Properties Dialog Box Directly from
Opening the Printer Properties Dialog Box Directly from
the Start Menu
the Start Menuthe Start Menu
the Start Menu" on page 29
3. Click the Maintenance
MaintenanceMaintenance
Maintenance tab and then click Low Ink Warning
Low Ink Warning Low Ink Warning
Low Ink Warning
Setting
SettingSetting
Setting icon.
4. Clear a check box of Display low ink warning
Display low ink warningDisplay low ink warning
Display low ink warning off and click
Send
SendSend
Send.
5. When the confirmation message is displayed, click OK
OKOK
OK.
1. Ensure that the printer is connected with the computer by USB
cable.
2. Ensure that the printer is turned on.
3. Double-click the hard disk icon where the printer driver was
installed, the Applications
ApplicationsApplications
Applications folder, and then the Utilities
UtilitiesUtilities
Utilities folder.
4. Double-click the Printer Setup Utility
Printer Setup UtilityPrinter Setup Utility
Printer Setup Utility icon.
If you are using an OS other than Mac OS X v.10.3, double-
click the Print Center
Print CenterPrint Center
Print Center icon.
5. Select iP90
iP90iP90
iP90 from the Name
NameName
Name list and click Utility
UtilityUtility
Utility or Configure
ConfigureConfigure
Configure.
6. Select iP90
iP90iP90
iP90 from the Product
ProductProduct
Product list and click Maintenance
MaintenanceMaintenance
Maintenance.
7. Select Remaining ink level setting
Remaining ink level settingRemaining ink level setting
Remaining ink level setting from the pop-up menu.
8. Clear the check box of Display the Remaining Ink Level
Display the Remaining Ink LevelDisplay the Remaining Ink Level
Display the Remaining Ink Level and
click Send
SendSend
Send.
9. When the confirmation message is displayed, click OK
OKOK
OK.
iP90_QSG_US.book Page 80 Thursday, December 7, 2006 11:03 AM