Filter
Top Products
Troubleshooting
77
Note
POWER lamp flashes alternately green and orange
POWER lamp flashes alternately green and orangePOWER lamp flashes alternately green and orange
POWER lamp flashes alternately green and orange
An error that requires contacting the Customer Care Center may have occurred.
Disconnect the printer cable from the printer, and then turn the printer off and
unplug the printer from the power supply. Reconnect the printer cable, and then
plug the printer back in and turn the printer back on after leaving it for a while.
If the problem remains, contact the Customer Care Center.
POWER lamp (green) repeats the illumination sequence (Bluetooth
POWER lamp (green) repeats the illumination sequence (Bluetooth POWER lamp (green) repeats the illumination sequence (Bluetooth
POWER lamp (green) repeats the illumination sequence (Bluetooth
Communication is used)
Communication is used)Communication is used)
Communication is used)
When Bluetooth Communication is used and BJ Status Monitor is active with the
printer power ON, the green POWER
POWERPOWER
POWER lamp repeats the illumination sequence in
which it goes out twice every 5 seconds even if nothing is printed. This
operation is not abnormal but it indicates that Bluetooth Communication is
checking the printer condition. When BJ Status Monitor ends, the POWER
POWERPOWER
POWER lamp
will stay lit.
iP90_QSG_US.book Page 77 Thursday, December 7, 2006 11:03 AM