Filter
Top Products
12-20 Troubleshooting Chapter 12
INVALID KEY/SETTING
K INK EMPTY
LOAD PAPER
(PRESS START KEY)
M INK EMPTY
MACHINE IN USE
CANNOT TURN OFF
MEMORY FULL
(#037)
MEMORY USED
nn %
NO FILES ON CARD
NO RX PAPER
(#012)
NO TEL #
(#022)
Fax Model
Fax Model
Fax Model
Check the key or setting you want to
enter.
Replace the ink tank.
Load paper in the multi-purpose tray.
Make sure the stack is below the
paper limit mark
(|t).Then press
[Start] or [Resume].
Replace the ink tank.
Wait until the machine has finished
the operation it is performing, then
turn off the machine.
Divide the document and send or
copy each part separately. To free up
space in the machine’s memory, print
or delete any documents in memory
you no longer need.
Print the photograph from your
computer.
Print any documents stored in
memory.Then start again.
Print or delete any documents in
memory, or wait for the machine to
send any documents stored in
memory.Then try printing
photographs again.
If you need more space, wait for the
machine to send any faxes. Also, print
or delete any documents in memory
you no longer need.
Make sure you have recorded
photographs in the appropriate
format on the memory card.
Contact the other party and have
them load paper in their fax machine
or free up space in their fax machine’s
memory.
Register the one-touch speed dialing
key or coded speed dialing code.
p. 11-4
p. 3-7
p. 11-4
p. 8-8
p. 8-8
p. 8-8
p. 8-8
Chapter 7
An invalid key was pressed or an
invalid setting was selected.
The black ink tank in the
printhead is empty.
The multi-purpose tray is empty.
The magenta ink tank in the
printhead is empty.
You are unable to turn the
machine off with the [ON/OFF(1
sec.)] key.
The machine’s memory is full
because you tried to send or
copy too many pages at once, or
a very long or detailed
document.
In photo print mode, the
photograph data is too large to
print from your machine.
The machine’s memory
is full because it has received too
many documents, or a very long
or detailed document.
In photo print mode,
you tried to print photographs
when the machine’s memory
was full.
Shows the percentage of
memory currently in use.
There are no available files in the
memory card.
The other party’s fax machine is
out of paper or its memory is full.
The one-touch speed dialing key
or coded speed dialing code you
entered has not been registered.
Fax Model
Fax Model
Message (Error code) Cause Action Details