Filter
Top Products
Chapter 5 Copying 5-3
Reducing or enlarging a copy
You can reduce or enlarge copies in three different ways: using preset copy ratios, using custom
copy ratios, or automatically reducing or enlarging an image to fit on the paper size selected.
NOTE
•For legal-size documents, the lowermost section of the document may not be copied.
Using preset copy ratios
Refer to M
aking copies on p. 5-1, and in step 4, adjust the copy ratio as follows:
1
Press [Enlarge/Reduce].
2
Press [2] or [3] to select the copy ratio.
•Select from the following:
– <25% MIN.>
– <78% LGL LTR>
– <95% A4 LTR>
–<100%>
– <212% 4" × 6" LTR>
– <400% MAX.>
3 Press [Set].
Using custom copy ratios
Refer to Making copies on p. 5-1, and in step 4, adjust the copy ratio as follows:
1 Press [Enlarge/Reduce] twice.
2 Use the numeric keys to enter a copy ratio between 25% and 400%.
•You can also use [2] and [3] to select the copy ratio.
3 Press [Set].
Copying an image to fit the page
If the document to be copied is on paper larger or smaller than the specified paper size
( p. 3-6), you can automatically reduce or enlarge the image to fit the selected paper size.
NOTE
•You can only use the platen glass with this feature.
•You can only use this feature when the print media size setting is set to <LTR> , <4" × 6">, or <A4>. For
details on setting the print media size, see p. 3-6.
Refer to Making copies on p. 5-1, and in step 4, follow this procedure:
1 Press [Enlarge/Reduce] three times.
2 Press [Set].
FIT-TO-PAGE
ZOOM 25-400%
- 100% +
PRESET RATIO
- 100% +