Filter
Top Products
9-6 Receiving faxes Chapter 9
Setting the ring pattern
Your telephone company will assign a distinctive ring pattern to each number when you
order the DRP service. Follow this procedure to set the fax ring pattern that matches the
pattern assigned by the telephone company:
1 Make sure you have set <DRPD> ( p. 9-1).
2 Press [Menu].
3 Use [2] or [3] to select <USER DATA>.
4 Press [Set].
5 Use [2] or [3] to select <FAX SETTINGS>.
6
Press [Set].
7 Use [2] or [3] to select <RX SETTINGS>.
8 Press [Set].
9 Use [2] or [3] to select <DRPD:SELECT FAX>.
10 Press [Set].
11 Use [2] or [3] to select the ring pattern that your telephone company
assigned to your fax number.
•Select from the following:
– <DOUBLE RING>
– <SHORT-SHORT-LONG>
– <SHORT-LONG-SHORT>
–<OTHER RING TYPE>
– <NORMAL RING>
12 Press [Set].
13 Press [Stop/Reset].
DRPD:SELECT FAX
DOUBLE RING
RX SETTINGS
1.ECM RX
FAX SETTINGS
1.USER SETTINGS
USER DATA
1.TEL REGISTRATION