Filter
Top Products
Chapter 13 Machine settings 13-5
Name
4. INCOMING RING
RING COUNT
5. MAN/AUTO SWITCH
F/T RING TIME
6. REMOTE RX
REMOTE RX ID
7. RX REDUCTION
REDUCE
DIMENSION
8. RX START SPEED
3. PRINTER SETTINGS
1. QUIET MODE
2. EXTENSION AMOUNT
4. SYSTEM SETTINGS
1. AUDIBLE TONES
1. KEYPAD VOLUME
2. ALARM VOLUME
2. CARD PROTECT
3. DISPLAY LANGUAGE
Setting
OFF
ON
2 TIMES
(1 to 99)
OFF
ON
15 SEC
(5 to 99)
ON
OFF
25 (00 to 99)
ON
OFF
VERTICAL ONLY
HORIZ & VERTICAL
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
—
OFF
ON
SMALL
LARGE
0 (off)/1/2/3
0 (off)/1/2/3
ON
OFF
ENGLISH
FRENCH
SPANISH
DetailsDescription
If you select <FAX ONLY MODE>, <FAX/TEL AUTO SW>,
or <DRPD> as the receive mode, enable/disable ringing
for fax calls. (A telephone must be connected to your
machine for ringing to occur.)
If you select <ON>, select the number of rings for fax
calls.
If you select <MANUAL MODE> as the receive mode,
select if the machine switches to fax receive mode after
ringing for a specified length of time.
If you select <ON>, select the length of time the
machine rings before switching to fax receive mode.
Enable/disable remote receiving.
If you select <ON>, select the remote receiving ID.
Enable/disable automatic reduction of faxes to fit the
paper loaded.
Select the direction of the reduction.
Select the speed at which the machine starts receiving.
—
Enable/disable quiet printing mode.
Select the extension amount for borderless printing.
—
—
Select the beep volume when pressing keys on the
operation panel.
Select the alarm volume.
Enable/disable overwriting memory card data in all
modes except photo print mode.
Select the language for LCD messages and reports.