Filter
Top Products
10-4 Reports and lists Chapter 10
Adjusting the RX REPORT setting
Your machine can print an RX (reception) report after receiving a document.You can set it to
print every time it receives a document, or only when an error occurs. Alternatively, you can
disable printing of a report.
Follow this procedure to adjust this setting:
1 Press [Menu].
2 Use [2] or [3] to select <USER DATA>.
3 Press [Set].
4 Use [2] or [3] to select <FAX SETTINGS>.
5 Press [Set].
6 Use [2] or [3] to select <REPORT SETTINGS>.
7 Press [Set].
Ex:
8 Use [2] or [3] to select <RX REPORT>.
9
Press [Set].
Ex:
10 Use [2] or [3] to select the setting you want.
•Select:
–<OUTPUT NO> to disable printing of a report.
– <PRINT ERROR ONLY> to print a report only when a reception error occurs.
–<OUTPUT YES> to print a report every time you receive a document.
11 Press [Set].
12 Press [Stop/Reset].
RX REPORT
OUTPUT NO
REPORT SETTINGS
1.TX REPORT
FAX SETTINGS
1.USER SETTINGS
USER DATA
1.TEL REGISTRATION