Filter
Top Products
4-2 Photo printing from a memory card Chapter 4
Inserting/removing a memory card
Inserting a memory card
To use a memory card, you will need to insert it into a PC card adapter before inserting it in
the card slot. Do not attempt to insert it into the card slot without a PC card adapter.
1 Make sure the machine is on.
•If not, press [ON/OFF(1 sec.)].
2 Insert the memory card into the PC card
adapter.
3 Insert the PC card adapter all the way
into the card slot on the right side of
the machine.
•The indicator light A turns on.
NOTE
•If the memory card cannot be read, check that:
– the PC card adapter containing the memory card is inserted all the way into the card slot.
– the PC card adapter containing the memory card was not removed while being read.
–you are using a compatible memory card.
–your memory card contains photographs.
Removing a memory card
CAUTION
•Do not remove the memory card or turn off the machine when the indicator light is blinking as
this may damage the data in the memory card.
1 Check that the indicator light is not
blinking q, then press [ON/OFF(1 sec.)]
to turn the machine off w.
•If you have been writing to a memory card
in Windows 2000, wait a few seconds before
turning off the machine.
w
q
A