Filter
Top Products
1-6
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-05
Chapter 1 Product Overview
Front Panel Description
The Catalyst 2960-24LT-L, Catalyst 2960-24TT-L, and Catalyst 2960-48TT-L switches have two
10/100/1000 uplink ports, numbered 1 and
2. Ports 1 to 8 on the Catalyst 2960-24LT-L switch are
PoE
ports. See Figure 1-7, Figure 1-8, and Figure 1-9.
Figure 1-7 Catalyst 2960-24LT-L Switch Front Panel
Figure 1-8 Catalyst 2960-24TT-L Switch Front Panel
Figure 1-9 Catalyst 2960-48TT-L Switch Front Panel
Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L Switches
The 10/100/1000 ports on the Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L switches are
grouped in pairs. The first member of the pair (port
1) is above the second member (port 2), port 3 is
above port
4, and so on. The SFP module slots are numbered 21 to 24 on the Catalyst 2960G-24TC-L
switch and 45 to 48 on the Catalyst 2960G-48TC-L switch. See
Figure 1-10 and Figure 1-11.
The Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L switches have dual-purpose ports, meaning
ports 21 to 24 or 45 to 48 can use either the SFP module or the RJ-45 connector for that port, but not
both. Use the software to set the connector type for these ports. For more information about the
dual-purpose port, see the
“Dual-Purpose Port” section on page 1-11.
1 10/100 ports PoE ports 3 10/100/1000 uplink ports
2 10/100 ports
270103
21 3
Catalyst 2960 Series PoE-8
POWER
OVER
ETHERNET
12
2X
2X
1X
1X
12X
11X
65 87 109 1211 21 43
14X
13X
24X
23X
1817 2019 2221 2423 1413 1615
SYST
STAT
DUPLX
SPEED
RPS
PoE
MODE
1 10/100 ports 2 10/100/1000 uplink ports
137065
SY
ST
R
PS
S
TA
T
D
UP
LX
S
PE
ED
M
O
D
E
1 2
1 10/100 ports 2 10/100/1000 uplink ports
137067
S
Y
S
T
R
P
S
S
T
A
T
D
U
P
LX
S
P
E
E
D
M
O
D
E
1
2