Filter
Top Products
Contents
iv
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-05
CHAPTER
2 Switch Installation (24- and 48-Port Switches) 2-1
Preparing for Installation 2-1
Warnings 2-2
Statement 371—Power Cable and AC Adapter 2-3
Guidelines for Particulate Matter 2-4
Installation Guidelines 2-5
Verifying Package Contents 2-6
Verifying Switch Operation 2-7
Installing the Switch 2-7
Rack-Mounting 2-8
Removing Screws from the Switch 2-8
Attaching Brackets to the Catalyst 2960 Switch 2-9
Mounting the Switch in a Rack 2-11
Attaching the Cable Guide 2-12
Wall-Mounting 2-12
Attaching the Brackets to the Switch for Wall-Mounting 2-13
Attaching the RPS Connector Cover 2-13
Mounting the Switch on a Wall 2-14
Table- or Shelf-Mounting 2-15
Installing and Removing SFP Modules 2-15
Installing SFP Modules into SFP Module Slots 2-16
Removing SFP Modules from SFP Module Slots 2-17
Connecting to the 10/100 and 10/100/1000 Ports 2-18
Connecting to SFP Modules 2-19
Connecting to Fiber-Optic SFP Modules 2-20
Connecting to 1000BASE-T SFP Modules 2-21
Connecting to a Dual-Purpose Port 2-22
Where to Go Next 2-22
CHAPTER
3 Switch Installation (8-Port Switches) 3-1
Preparing for Installation 3-1
Warnings 3-1
Statement 371—Power Cable and AC Adapter 3-2
Installation Guidelines 3-3
Equipment That You Supply 3-4
Verifying Package Contents 3-5
Verifying Switch Operation 3-6