Filter
Top Products
1-11
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-05
Chapter 1 Product Overview
Front Panel Description
Dual-Purpose Port
You can configure a dual-purpose port as either a 10/100/1000 port or as an SFP module port.
Only one port can be active at a time. If both ports are connected, the SFP module port has priority.
You
cannot configure the priority setting.
You can set the 10/100/1000 ports to autonegotiate. You can also configure them as fixed 10, 100, or
1000
Mb/s (Gigabit) Ethernet ports. You can configure the duplex setting. See the software configuration
for more information.
Power Input Port (Catalyst 2960PD-8TT-L Switch)
The Catalyst 2960PD-8TT-L can receive power from these sources:
1. Through a 10/100/1000 port from an upstream Ethernet switch that provides power (complies with
IEEE 802.3af). (See
Figure 1-15.)
2. Through an external AC power adapter that connects to the back of the switch. This external power
adapter (PWR-A=) is not included with the switch, but you can order it from your Cisco
representative. (See
Figure 1-16.)
Figure 1-15 Connecting Through a 10/100/1000 Port
1 10/100/1000 Port
Catalyst 2960 Series
SYST
STAT
DPLX
SPD
MODE
CONSOLE
1
1x 2x 3x 4x 5x 6x 7x
8x
PoE INPUT
270434
1