Filter
Top Products
2-9
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-05
Chapter 2 Switch Installation (24- and 48-Port Switches)
Installing the Switch
Attaching Brackets to the Catalyst 2960 Switch
The bracket orientation and the brackets that you use depend on whether you are attaching the brackets
for a 19-inch or a 24-inch rack. For 19-inch racks, use bracket part number 700-8209-01; for 24-inch
racks, use bracket part number 700-13248-01.
Figure 2-2 to Figure 2-7 show how to attach each type of
bracket to one side of the switch. Follow the same steps to attach the second bracket to the opposite side.
Figure 2-2 Attaching Brackets for 19-Inch Racks to a Catalyst 2960 Switch, Front Panel Forward
Figure 2-3 Attaching Brackets for 24-Inch Racks to a Catalyst 2960 Switch, Front Panel Forward
Figure 2-4 Attaching Brackets for 19-Inch Racks to a Catalyst 2960 Switch, Rear Panel Forward
1 Phillips flat-head screws
SYST
RPS
STAT
DUPLX
SPEED
M
O
D
E
1
X
1
1
X
1X
2X
11X
12X
137073
1
1 Phillips flat-head screws
SYST
RPS
STAT
DUPLX
SPEED
M
O
D
E
1
X
1
1
X
1
X
2
X
1
1
X
1
2
X
137074
1
1 Phillips flat-head screws
1
137075