Filter
Top Products
Configuring the Cisco 12008
Cisco 12008 Gigabit Switch Router Installation and Configuration Guide
4-28
Example of Running Configuration Settings for Quad OC-3 POS Interface
The show running-config command typically displays output in the following form for a
Quad OC-3c/STM-1c POS interface installed in slot 7:
Ohm#sh run
Building configuration...
Current configuration:
!
version 11.2
no service pad
no service udp-small-servers
no service tcp-small-servers
!
hostname Ohm
!
enable secret 5 $1$W6K5$W/p5Bq6IPLGJ/hS9VVP1g.
enable password lab
interface POS7/0
ip address 11.1.1.1 255.255.255.0
crc 32
clock source internal
!
interface POS7/1
no ip address
no ip route-cache cef
no ip route-cache
shutdown
crc 32
!
interface POS7/2
no ip address
no ip route-cache cef
no ip route-cache
shutdown
crc 32
!
interface POS7/3
no ip address
no ip route-cache cef
no ip route-cache
shutdown
crc 32