Filter
Top Products
Observing System Startup and Performing a Basic Configuration 4-31
Configuring the Cisco 12008
Reviewing the Running Configuration Settings
To display the running configuration settings stored in NVRAM, issue the show startup-
config command at the privileged EXEC mode prompt. This command displays output in
the following form:
Router# show startup-config
Using 1133 out of 520184 bytes
!
version 11.2
no service udp-small-servers
no service tcp-small-servers
!
hostname Router
!
enable password wilma
ip cef distributed switch
ip host biff 3.3.3.254
!
interface Ethernet0
ip address 3.3.1.1 255.255.0.0
no ip mroute-cache
!
interface POS3/0
ip address 2.1.1.1 255.0.0.0
no keepalive
crc 16
no cdp enable
!
interface POS3/1
ip address 2.1.1.2 255.0.0.0
no keepalive
crc 16
no cdp enable
!
interface POS3/2
ip address 2.1.1.3 255.0.0.0
no keepalive
crc 32
no cdp enable
!
interface POS3/3
ip address 2.1.1.4 255.0.0.0
no keepalive
crc 32