Filter
Top Products
Contents
xi
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
78-17058-01
Default Layer 2 Ethernet Interface VLAN Configuration 11-16
Configuring an Ethernet Interface as a Trunk Port 11-16
Interaction with Other Features 11-16
Configuring a Trunk Port 11-17
Defining the Allowed VLANs on a Trunk 11-17
Configuring the Native VLAN for Untagged Traffic 11-19
Configuring Trunk Ports for Load Sharing 11-19
Load Sharing Using STP Port Priorities 11-20
Load Sharing Using STP Path Cost 11-21
Configuring VMPS 11-23
Understanding VMPS 11-23
Dynamic-Access Port VLAN Membership 11-24
Default VMPS Client Configuration 11-24
VMPS Configuration Guidelines 11-25
Configuring the VMPS Client 11-25
Entering the IP Address of the VMPS 11-25
Configuring Dynamic-Access Ports on VMPS Clients 11-26
Reconfirming VLAN Memberships 11-26
Changing the Reconfirmation Interval 11-27
Changing the Retry Count 11-27
Monitoring the VMPS 11-27
Troubleshooting Dynamic-Access Port VLAN Membership 11-28
VMPS Configuration Example 11-28
CHAPTER
12 Configuring Private VLANs 12-1
Understanding Private VLANs 12-1
Types of Private VLANs and Private-VLAN Ports 12-2
IP Addressing Scheme with Private VLANs 12-4
Private VLANs across Multiple Switches 12-4
Private VLANs and Unicast, Broadcast, and Multicast Traffic 12-5
Private VLANs and SVIs 12-5
Configuring Private VLANs 12-5
Tasks for Configuring Private VLANs 12-6
Default Private-VLAN Configuration 12-6
Private-VLAN Configuration Guidelines 12-6
Secondary and Primary VLAN Configuration 12-7
Private-VLAN Port Configuration 12-8
Limitations with Other Features 12-9
Configuring and Associating VLANs in a Private VLAN 12-10