Filter
Top Products
11-26
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
78-17058-01
Chapter 11 Configuring VLANs
Configuring VMPS
Configuring Dynamic-Access Ports on VMPS Clients
Caution Dynamic-access port VLAN membership is for end stations or hubs connected to end stations.
Connecting dynamic-access ports to other switches can cause a loss of connectivity.
Beginning in privileged EXEC mode, follow these steps to configure a dynamic-access port on a VMPS
client switch:
To return an interface to its default configuration, use the default interface interface-id interface
configuration command. To reset the access mode to the default VLAN for the switch, use the no
switchport access vlan interface configuration command.
Reconfirming VLAN Memberships
Beginning in privileged EXEC mode, follow these steps to confirm the dynamic-access port VLAN
membership assignments that the switch has received from the VMPS:
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
interface interface-id Specify the switch port that is connected to the end station, and enter
interface configuration mode. The port must be a UNI.
Step 3n
no shutdown Enable the port.
Step 4
port-type uni Configure the port as a UNI.
Step 5
switchport mode access Set the port to access mode.
Step 6
switchport access vlan dynamic Configure the port as eligible for dynamic VLAN membership.
The dynamic-access port must be connected to an end station.
Step 7
end Return to privileged EXEC mode.
Step 8
show interfaces interface-id switchport Verify your entries in the Operational Mode field of the display.
Step 9
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step 1
vmps reconfirm Reconfirm dynamic-access port VLAN membership.
Step 2
show vmps Verify the dynamic VLAN reconfirmation status.