Filter
Top Products
Chapter 6 Cabling the Line Ports and Completing the Installation
Loading and Activating a Service Control Application
SCE 2000 4xGBE Installation and Configuration Guide
6-16 OL-7824-02
To view the current link mode:
Step 1 From the SCE 2000
#
prompt, type show interface linecard 0 link mode
and press
Enter
.
To view the current link mappings:
Step 1 From the SCE 2000
#
prompt, type show interface linecard 0
physically-connected-links and press
Enter
.
Loading and Activating a Service Control Application
The SCE 2000 platform provides the basic functionalities of Service Control analysis and
enforcement. A Service Control solution requires that a Service Control application be loaded into
the platform, to take advantage of the unique SCE platform capabilities.
Loading and activating an application includes the following stages:
• Downloading the application provided as an SLI file to the SCE 2000 disk.
• Activating the application.
• Configuring the application.
The detailed procedure of how to perform these operations is not specified and described in this
manual. For further details, refer to the following documentation:
• Service Control Application Suite for Broadband User Guide
• Service Control Application Suite for Broadband Reference Guide