Filter
Top Products
Chapter 8 Troubleshooting
Troubleshooting Overview
SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-02 8-5
Copying the User Log
You can view the log file by copying it to an external source or to disk. This command copies
both log files to the local SCE 2000 platform disk or any external host running a FTP server.
To copy the user log to an external source, complete the following steps:
Step 1 From the SCE 2000# prompt, type logger get user-log file-name
ftp://username:password@ipaddress/path and press Enter.
The SCE 2000# prompt appears.
To copy the user log to an internal location, complete the following steps:
Step 1 From the SCE 2000# prompt, type logger get user-log file-name
target-filename and press Enter.
The SCE 2000# prompt appears.
Viewing the User Log
Note
This command is not recommended when the user log is large. Copy a large log to a file to view it (see
Copying the User Log (on page 8-5))
To view the user log, complete the following steps:
Step 1 From the SCE 2000
#
prompt, type more user log and press Enter.
The user log appears, followed by the SCE 2000
#
prompt.