Filter
Top Products
Chapter 2 Overview of the SCE 2000 Platform
Front Panel
SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-02 2-5
LED Groups Description
Bypass
• Continuous green: indicates that the traffic bypasses the SCE 2000 through an
internal electrical bypass module.
Single SCE 2000 topology: The SCE 2000 is either in bypass or sniffing mode
Cascaded topology: Either the SCE 2000 is forwarding traffic to the other SCE
2000, where it is being processed, or is simply in bypass mode, so traffic
through it is not being processed.
• Unlit: traffic is not being bypassed
Single SCE 2000 topology: indicates normal operation of the SCE 2000
Cascaded topology: indicates normal operation of the active SCE 2000
GBE ports The GBE LEDs indicate the operational status of the SCE 2000 line ports, as
follows:
• Link
Green: indicates that the port link is up
Unlit: indicates that the port link is down
• Rx
Flashing Green: indicates that there are incoming packets
• Tx
Flashing Green: indicates that there are outgoing packets
Mng The Mng port LEDs indicate the operational status of the SCE 2000 out-of-band
LAN-based management port, as follows:
• Link/Active
Green: indicates that the port link is up
Unlit: indicates that the port link is down
• 10/100/1000
Steady green: indicates that the port is set to 100 Mbps
Unlit: indicates that the port is set to 10 Mbps
Orange: indicates that the port is set to 1000 Mbps