Filter
Top Products
Chapter 7 Basic SCE 2000 Platform Operations
Managing SCE 2000 Configurations
SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-02 7-7
To show the system uptime for the SCE 2000 platform software and hardware, complete the
following steps:
Step 1 At the SCE 2000# prompt, type show system-uptime.
The system shows how long the system has been running since the last reboot.
SCE 2000#show system-uptime
SCE 2000 uptime is 21 minutes, 37 seconds
SCE 2000#
Saving the Configuration Settings
When you make changes to the current running configuration and you want those changes to
continue to be valid when the system restarts, you must save the changes before leaving the
management session, that is, you must save the running configuration to the startup configuration
file.
As mentioned before, SCE 2000 platform provides multiple interfaces for the purpose of
configuration and management. All interfaces supply an API to the same database of the SCE
2000 platform and any configuration made through one interface is reflected through all
interfaces. Furthermore, when saving the running configuration to the startup configuration from
any management interface, all configuration settings are saved regardless of the management
interface used to set the configuration.
To save configuration changes, complete the following steps:
Step 1 At the SCE 2000# prompt, type show running-config to view the running
configuration.
The running configuration is displayed.
Step 2
Check the displayed configuration to make sure that it is set the way you want. If not,
make the changes you want before saving.
Step 3 Type copy running-config startup-config.
The system saves all running configuration information to the configuration file, which is used when the
system reboots.
The configuration file holds all information that is different from the system default in a file called
config.txt located in the directory: tffs0:system.