Filter
Top Products
Chapter 4 Installation and Maintenance
Installing the SCE 2000 Platform
SCE 2000 4xGBE Installation and Configuration Guide
4-4 OL-7824-02
Site Requirements
The following tables contain the site requirement specifications for the SCE 2000.
Table 4-2 SCE 2000 Environmental Requirements
Specification Acceptable Range
Temperature - nominal 41°F to 104°F (5°C to 40°C)
Short term temperatures* 23°F to 131°F (-5°C to +55°C)
Relative humidity 5% to 95% (non-condensing)
Heat dissipation 683 BTU/hour
*Short term is defined as not more than 96 consecutive hours, not more than 15 days in one year.
360 hours total in any given year, but no more than 15 occurrences in a one-year period.
Table 4-3 SCE 2000 Approvals Specifications
Approval Specification
EMC
• CE Mark
• EMISSIONS: FCC Part 15 CFR 47 Class A, EN 55022 Class A, CISPR22
Class A, VCCI Class A, AS/NZS CISPR22 Class A
• Immunity - EN 50082-1 EN 55024, CISPR24 (ESD, RFI, EFT, etc.)
(Commercial)
Safety UL/CSA 60950, IEC60950, EN60950, AS/NZS, 60950, NOM-
019,IEC/EN60825-1, -2, 21CFR1040, 73/23/ECC
For more complete information regarding safety and regulatory compliance, refer to the
Regulatory Compliance and Safety Information for the Cisco Service Control Engine document.
Warning
The DC-powered SCE 2000 should be installed in a Restricted Access Location only.
Installing the SCE 2000 Platform
The SCE 2000 operates as either a tabletop or a rack-mounted unit. A rack-mounting kit is
included with the SCE 2000 when it is shipped from the factory. The kit provides the hardware
needed (see SCE 2000 Components List) to mount the SCE 2000 in either of two types of
standard 19-inch equipment rack:
• 19-inch rack with only two posts in the front: Use the supporting brackets included in the kit
• 19-inch rack with four posts, two in the front and two in the back: Use the crossrail supports
included in the kit