Filter
Top Products
23
Using the Compaq A1500 Settings Utility
Settings Utility Overview
The A1500 Settings Utility allows you to change the
default settings of your A1500 All-In-One. For
instance, if you make a copy by pressing the Copy
button and then Start, the default copy settings will be
used.
The default copy setting is Black Normal. If you
normally perform color copies, you can change the
default to Color Normal instead by using the Settings
Utility. You can customize dozens of settings to suit
your preferences.
You can always make a temporary change for a
specific job (for instance, changing the mode to Color
Best while performing a copy). When you are finished
with the current job, the A1500 will default back to the
settings you have chosen with the Settings Utility.
Accessing the Settings Utility
There are a number of ways to access the A1500
Settings Utility:
• From the Start button:
Click StartProgramsCompaq A1500 All-In-
One Compaq A1500 Settings Utility.
• From the system tray, left click on the A1500
Monitor icon, as shown below:
From the system tray, right click on the A1500
Monitor icon, and select A1500 Settings from the menu
that appears.
The A1500 Monitor Right Click Menu
Main Settings Window
The main settings window is the starting point for
accessing all of the A1500 settings. Select one of the
buttons to change the default settings of the
corresponding All-In-One feature (Fax for Fax
settings, Copy for Copy settings, and so on).
The Main Settings Window
You can make changes to your A1500 settings even when your
A1500 is not connected to your computer. Any changes will be
sent to the A1500 the next time it is connected.
IMPORTANT: Your settings changes are sent to the
A1500 after you press the Ok button, the Close button,
or the [x] close button.