Filter
Top Products
Solving Problems 157
Alert! System fan not
detected.
No system fan is installed; system fan
has failed; system fan is not
connected to the system board.
Ensure that an operational system fan is
installed and connected to the system
board.
Alert! Uncorrectable
memory error previously
detected in XXXXh.
Faulty or improperly seated Rambus
in-line memory modules (RIMMs) or
defective system board.
See "System Memory Problems" and
"System Board Problems."
Alert! Unsupported AGP
adapter card installed.
System halted!
A high-power AGP Pro110 graphics
card is installed in a desktop
computer.
Replace the AGP Pro110 graphics card
with an AGP Pro50 graphics card.
Attachment failed to
respond
The diskette drive or hard drive
controller cannot send data to the
associated drive.
See "Diskette Drive Problems" and "Hard
Drive Problems."
Bad command or file name The command you entered does not
exist or the file name you specified is
faulty.
Ensure that you have spelled the
command correctly, put spaces in the
proper place, and used the correct
pathname.
Bad error-correction code
(ECC) on disk read
The diskette drive or hard drive
controller detected an uncorrectable
read error.
See "Diskette Drive Problems" and "Hard
Drive Problems."
Controller has failed The hard drive or the associated
controller is defective.
See "Hard Drive Problems."
Data error The diskette or hard drive cannot
read the data.
Run the ScanDisk utility in the Microsoft
Windows operating system to check the
file structure of the diskette or hard drive.
See your operating system documentation
for more information.
If you are using a different operating
system, run the appropriate utility to
check the file structure of the diskette or
hard drive. See your operating system
documentation.
Decreasing available
memory
One or more RIMMs may be faulty or
improperly seated.
See "System Memory Problems."
System Messages
(continued)
Message Cause Action