Filter
Top Products
90 Installing Upgrades
www.dell.com | support.dell.com
9 Connect a DC power cable to the power input connector on the back
of the drive (see the following figure).
Attaching Hard-Drive Cables (Desktop Chassis)
10 Ensure that all cables are firmly connected. Fold cables out of the way
to provide airflow for the fan and cooling vents.
11 Ensure that the control panel cable is firmly connected to the system
board.
The control panel contains the hard-drive activity indicator. To locate
the control panel system board connector, see "System Board
Components."
12 Replace the computer cover, reconnect the computer and peripherals
to their electrical outlets, and turn them on.
NOTE: If enabled, the Chassis Intrusion option will cause the following
message to be displayed at the next system start-up:
interface cable
primary system board EIDE connector
DC power cable
interface connector
power input connector