Filter
Top Products
72 Installing Upgrades
www.dell.com | support.dell.com
Installing the Drive Bracket (Mini Tower Chassis)
8
Connect the interface cable for the drive. See "Attaching Drive Cables
(Mini Tower Chassis)."
NOTICE: To avoid possible damage, you must match the colored strip on the
interface cable with pin 1 on both the drive and system board connectors.
a If you are installing an enhanced integrated drive electronics
(EIDE) device, ensure that the interface cable is properly
connected to the EIDE connector on the system board. For more
information, see "EIDE Device Installation Guidelines."
b If you are installing a small computer system interface (SCSI)
device, ensure that the SCSI interface cable is properly connected
to the interface connector on the SCSI controller board. For more
information, see "SCSI Device Installation Guidelines."
9 Connect a DC power cable to the power input connector on the back
of the drive (see the following figure).
drive/bracket assembly
bracket tabs (2)