Filter
Top Products
2. Follow the procedure listed in After working inside your system.
Related Tasks
Installing the 1.8 inch uSATA SSD cage
Internal USB memory key (optional)
The USB memory key installed inside your system can be used as a boot device, security key, or mass
storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then specify
the USB memory key in the boot sequence in System Setup.
The internal USB connector is located on the system board.
Replacing the internal USB key
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. The USB connector must be enabled by the Internal USB Port option in the Integrated Devices
screen of System Setup.
3. Follow the procedure listed in Before working inside your system.
4. Remove the 1.8 inch uSATA SSD cage. For more information, see Removing the 1.8 inch uSATA SSD
cage.
Steps
1. Locate the USB connector or the USB key on the system board.
The internal USB connector is located under the 1.8 inch uSATA SSD cage. For more information, see
System board connectors.
2. If installed, remove the USB key from the USB connector.
3. Insert the replacement USB key into the USB connector.
107