Filter
Top Products
Item Indicator, button, or
connector
Icon Description
To reset iDRAC (if not disabled in F2 iDRAC setup),
press and hold the button for more than 15
seconds.
2 NMI button
Used to troubleshoot software and device driver
errors when running certain operating systems.
This button can be pressed using the end of a
paper clip.
Use this button only if directed to do so by
qualified support personnel or by the operating
system documentation.
3 iDRAC8 Enterprise port Dedicated management port.
4 Half-height PCIe
expansion card slot 1
Allows you to connect half-height, half-length, low
profile PCI Express expansion cards.
5 Serial connector Allows you to connect a serial device to the
system.
6 Video connector Allows you to connect a VGA display to the system.
7 USB connector (2) Allows you to connect USB devices to the system.
The ports are USB 3.0-compliant.
8 Half-height PCIe
expansion card slot 2
Allows you to connect half-height, half-length, low
profile PCI Express expansion cards.
9 Information tag A slide-out label panel which allows you to record
system information such as Service Tag, NIC, MAC
address and so on as per your need.
10 Ethernet connector (2) Two integrated 10/100/1000/Mbps NIC
connectors.
11 Hard drive (2) Up to two 1.8 inch uSATA SSDs.
12 Power supply unit (PSU1) One 1600 W or 1100 W PSU.
13 Power supply unit
(PSU2)/2.5 inch Hard
drive cage slot
One 1600 W or 1100 W PSU or up to four 2.5 inch
cabled hard drives.
12