Filter
Top Products
Figure 41. Replacing the internal USB key
1. USB memory key 2. USB memory key connector
Next steps
1. Install the 1.8 inch uSATA SSD cage.
2. Follow the procedure listed in After working inside your system.
3. While booting, press <F2> to enter System Setup and verify that the USB key is detected by the
system.
Related Tasks
Installing the 1.8 inch uSATA SSD cage
Cable routing clip
Removing the cable routing clip
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Disconnect and remove the cables routed through the cable routing clip.
4. Keep the Phillips #2 screwdriver ready.
108