Filter
Top Products
Figure 6. Removing and installing the system top cover (front)
1. system cover lock 2. release tab (2)
3. system top cover (front)
Installing the system top cover (front)
Prerequisites
1. Ensure that you read the Safety instructions.
2. Ensure that all internal cables are connected and routed correctly.
NOTE: Closing the system cover with incorrect cable routing can damage the cables.
Steps
1. Align the slots of the system top cover with the tabs on the chassis.
2. Slide the cover toward the back of the chassis until it locks into place.
3. Turn the system cover lock to the locked position.
Next steps
CAUTION: Turn on the system only when both the system top covers are installed.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Removing the system top cover (back)
Prerequisites
CAUTION: Do not operate the system without the system cover. This can result in overheating
and cause component damage.
41